Availability: | |
---|---|
Quantity: | |
TR-T22138
Trumony
202201138
Electric Battery Side Cooling System Aluminum Channel Cooling Ribbon
As a leading manufacturer of cooling plates for EV battery cooling solutions, it's pleased to inform that we have been working with many big companies in Europe and South America, such as BMW, Tesla...
We are in a good position not only to supply you high quality products, but also the design services support. Rich experienced engineers will offer you any technical support, such as full solution for all kinds of batteries, thermal simulation.
Detials:
Structure | Snake tube + manifold |
Thickness | Per your request |
Width/Length | According to your boundary size |
Surface treatment | Zinc Spray, Insulation coating, Bare |
Applications |
|
Without design? We have R&D department, so we are able to provide the design service. Necessary information for design cooling plate:
Medium coolant
Inlet/outlet temperature
Liquid flow path
Work temperature
Size
Type of battery
End application
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Electric Battery Side Cooling System Aluminum Channel Cooling Ribbon
As a leading manufacturer of cooling plates for EV battery cooling solutions, it's pleased to inform that we have been working with many big companies in Europe and South America, such as BMW, Tesla...
We are in a good position not only to supply you high quality products, but also the design services support. Rich experienced engineers will offer you any technical support, such as full solution for all kinds of batteries, thermal simulation.
Detials:
Structure | Snake tube + manifold |
Thickness | Per your request |
Width/Length | According to your boundary size |
Surface treatment | Zinc Spray, Insulation coating, Bare |
Applications |
|
Without design? We have R&D department, so we are able to provide the design service. Necessary information for design cooling plate:
Medium coolant
Inlet/outlet temperature
Liquid flow path
Work temperature
Size
Type of battery
End application
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
About us
Founded in 2006, is a leading supplier of critcal heat transfer material for automobile and industrial cooling sectors. Using advanced equipment and technology, Trumony Aluminum Ltd provides products cover 1,3,4,5,6,7 and 8 series aluminum alloy, brazing aluminum fins, steel/aluminum cladded tubes, high frequency welded tubes and headers and so on many varietes, many specificatons of the product series.
About us
Founded in 2006, is a leading supplier of critcal heat transfer material for automobile and industrial cooling sectors. Using advanced equipment and technology, Trumony Aluminum Ltd provides products cover 1,3,4,5,6,7 and 8 series aluminum alloy, brazing aluminum fins, steel/aluminum cladded tubes, high frequency welded tubes and headers and so on many varietes, many specificatons of the product series.