Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
TR-CY-T107
Trumony
TRCYT107
Regard to the vacuum brazed cold plate, it is combined with cooling channel plate and covered plate through brazing furnace . We do the cooling channels by stamping process which will convenient for coolant flow in between the two brazed plates . The channel design can be customized as your request. Then we can assist you to evaluate the production feasibility and give our optimized suggestion.Normally , the cooling channel thickness is 1-1.5mm, the covered plate thickness is 1.5-2mm. After stamping, the total thickness will be 5-8mm.
Item : EV Battery Module Coolant Plate
Size : As your design
Thickness : 5-7mm
Cooling type : Liquid cooling plate
Structure : Stamped cold plate /aluminum down plate / inlet/outlet/ plastic quick connectors
Application : prismatic battery or soft package cells
Plate type : cold plate cooling plate for EV, stamped cold plate for ESS,harmonica shaped cooling tube plate , EV battery snake cooling tube ,aluminum roll bonded plate .
Company Information:
Trumony Aluminium Limited, We are a professional battery pack heat exchanger manufacturer.
Our company designs, makes and distributes heat exchangers for battery packs,for example snake tubes for cylindrical cells (18650,21700); water cooling plate for prismatic cells, and plate channel for pouches.
As battery thermal management is very critical in an operation of EV. Here are a few things we are good at:
1. Tooling development — we do it in house, so we can make initial testing prompt and accurate.
2. Making all kinds of heat exchangers — we can do customized shape, to make the parts fit into different packs.
3. Assistance in parts design — we have experienced engineer team, they can provide professional suggestions regarding feasibility of carrying out new designs.
FAQ :
1. What battery module cooling solution you can provide ?
A: We have 4 kinds of battery cooling type for your battery pack. Aluminum snake tube for cylindrical shaped of cells. Aluminum brazed cooled plate for prismatic cells ,aluminum micro channel plates for pouches and aluminum roll bonded panels .
2.What the alloy and temper of your water cooling plate ？
A:The aluminum alloy is 3000,6000 and temper is O-H112.
3.What the process technology to do the cold plate or coolant channles ?
A:Aluminum extrusion process , vacuum brazing process, roll bonded process and we also have CNC center.
4.Do you support customized prototype for battery pack module ?
A:Sure, we can produce the aluminum liquid cooling plate as your design. If just at the development stage, our existing cooled plate heat sinks are available for checking.
Regard to the vacuum brazed cold plate, it is combined with cooling channel plate and covered plate through brazing furnace . We do the cooling channels by stamping process which will convenient for coolant flow in between the two brazed plates . The channel design can be customized as your request. Then we can assist you to evaluate the production feasibility and give our optimized suggestion.Normally , the cooling channel thickness is 1-1.5mm, the covered plate thickness is 1.5-2mm. After stamping, the total thickness will be 5-8mm.
Item : EV Battery Module Coolant Plate
Size : As your design
Thickness : 5-7mm
Cooling type : Liquid cooling plate
Structure : Stamped cold plate /aluminum down plate / inlet/outlet/ plastic quick connectors
Application : prismatic battery or soft package cells
Plate type : cold plate cooling plate for EV, stamped cold plate for ESS,harmonica shaped cooling tube plate , EV battery snake cooling tube ,aluminum roll bonded plate .
Company Information:
Trumony Aluminium Limited, We are a professional battery pack heat exchanger manufacturer.
Our company designs, makes and distributes heat exchangers for battery packs,for example snake tubes for cylindrical cells (18650,21700); water cooling plate for prismatic cells, and plate channel for pouches.
As battery thermal management is very critical in an operation of EV. Here are a few things we are good at:
1. Tooling development — we do it in house, so we can make initial testing prompt and accurate.
2. Making all kinds of heat exchangers — we can do customized shape, to make the parts fit into different packs.
3. Assistance in parts design — we have experienced engineer team, they can provide professional suggestions regarding feasibility of carrying out new designs.
FAQ :
1. What battery module cooling solution you can provide ?
A: We have 4 kinds of battery cooling type for your battery pack. Aluminum snake tube for cylindrical shaped of cells. Aluminum brazed cooled plate for prismatic cells ,aluminum micro channel plates for pouches and aluminum roll bonded panels .
2.What the alloy and temper of your water cooling plate ？
A:The aluminum alloy is 3000,6000 and temper is O-H112.
3.What the process technology to do the cold plate or coolant channles ?
A:Aluminum extrusion process , vacuum brazing process, roll bonded process and we also have CNC center.
4.Do you support customized prototype for battery pack module ?
A:Sure, we can produce the aluminum liquid cooling plate as your design. If just at the development stage, our existing cooled plate heat sinks are available for checking.
