Phone:
+86-13584862808
 |
| Material: | |
|---|---|
| Temper: | |
| Size of tube: | |
| Origin: | |
| Surface Treatment: | |
| Quantity: | |
TR-T22128
Trumony
202201128
Aluminum Heat Exchange Powder Coated 32700 Cell Liquid Cooling Channel Tube
The power battery pack is composed of many cells. 32700 cells is one of those. Our serptine tube is the best way to dissipate heat from cylindrical batteries. Trumony has strict raw material components inspection and thermal simulation ability, which means design flow channel, thermal simulation and thermal designs.
Detials:
| Item | Snake tube for cylindrical cell |
| Thickness | 2.5~3.5mm， or per your request. |
| Width/Length | According to your boundary size (your module size) |
| Structure | Aluminum cooling tube after bending & waving, manifold, connector |
| Surface treatment | Powder coated, insulation coating, bare |
Features: |
1. Flexible design solutions for all kinds of batteries |
2. Rich manufacturing knowledge in sampling, brazing and welding. |
3. Better temperature control at battery contact surface |
4. Wide range of mounting and connection solutions |
5. Customized plate design according to your module layout |
Test Ability | |
Chemical Composition Test | YES |
Pysical Test & Optics Test | YES |
Roughness Test & Hardness Test | YES |
Elongation Test | YES |
Salt Spray Test | YES |
Burst Test | YES |
Nitrogen & Helium Test | YES |
Flow Resistance Test | YES. Inside &outside corrosion test |
Voltage Test | YES |
Under Water Test | YES. Check the leakage for welding |
We have R&D department, so we can provide the design service. There's no problem if you don't have any design.
Necessary information for design cooling plate:
Medium coolant
Inlet/outlet temperature
Liquid flow path
Work temperature
Size
Type of battery
End application
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Aluminum Heat Exchange Powder Coated 32700 Cell Liquid Cooling Channel Tube
The power battery pack is composed of many cells. 32700 cells is one of those. Our serptine tube is the best way to dissipate heat from cylindrical batteries. Trumony has strict raw material components inspection and thermal simulation ability, which means design flow channel, thermal simulation and thermal designs.
Detials:
| Item | Snake tube for cylindrical cell |
| Thickness | 2.5~3.5mm， or per your request. |
| Width/Length | According to your boundary size (your module size) |
| Structure | Aluminum cooling tube after bending & waving, manifold, connector |
| Surface treatment | Powder coated, insulation coating, bare |
Features: |
1. Flexible design solutions for all kinds of batteries |
2. Rich manufacturing knowledge in sampling, brazing and welding. |
3. Better temperature control at battery contact surface |
4. Wide range of mounting and connection solutions |
5. Customized plate design according to your module layout |
Test Ability | |
Chemical Composition Test | YES |
Pysical Test & Optics Test | YES |
Roughness Test & Hardness Test | YES |
Elongation Test | YES |
Salt Spray Test | YES |
Burst Test | YES |
Nitrogen & Helium Test | YES |
Flow Resistance Test | YES. Inside &outside corrosion test |
Voltage Test | YES |
Under Water Test | YES. Check the leakage for welding |
We have R&D department, so we can provide the design service. There's no problem if you don't have any design.
Necessary information for design cooling plate:
Medium coolant
Inlet/outlet temperature
Liquid flow path
Work temperature
Size
Type of battery
End application
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
