Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
TR-T22141
Trumony
202201141
Aluminum Brazing Liquid Cooling Plate for Heat Exchanger of Automobile Cooling System Design Develop
As a leading manufacturer of cooling plates for EV battery cooling solutions, it's pleased to inform that we have been working with many big companies in Europe and South America, such as BMW, Tesla...
We are in a good position not only to supply you high quality products, but also the design services support. Rich experienced engineers will offer you any technical support, such as full solution for all kinds of batteries, thermal simulation, mechanical simulation, CNC quick connector and etc.
Detials:
| Item | Water cooling plate for EV battery |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Applications |
|
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamped type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
5) Exposed tube cold plate
6) FSW coldplate
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Aluminum Brazing Liquid Cooling Plate for Heat Exchanger of Automobile Cooling System Design Develop
As a leading manufacturer of cooling plates for EV battery cooling solutions, it's pleased to inform that we have been working with many big companies in Europe and South America, such as BMW, Tesla...
We are in a good position not only to supply you high quality products, but also the design services support. Rich experienced engineers will offer you any technical support, such as full solution for all kinds of batteries, thermal simulation, mechanical simulation, CNC quick connector and etc.
Detials:
| Item | Water cooling plate for EV battery |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Applications |
|
According to various applications and requirements of thermal management, we can provide a range of battery cooling solutions.
1) Stamped type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond cooling plate for heating / cooling.
5) Exposed tube cold plate
6) FSW coldplate
Our Advantages:
1) Flexible design solutions for all kinds of battery pack.
(According to your module provide customized cooling plate)
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) CNC centre to make customized inlet/outlet connector.
4) Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
