Phone:
+86-13584862808
 |
| Material: | |
|---|---|
| Application: | |
| Country of Origin: | |
| Specification: | |
| Structure : | |
| Quantity: | |
TR-T22136
Trumony
202201136
Thickness of 6~8mm Aluminum Brazing Cooling Plate Heat Sink for Electric Vehicle
The brazing cooling plate is a mature design for prismatic cells or battery pack, through excellent stamping processing technology and high-quality aluminum raw materials, the performance of stamping type cooling plate to a higher standard. Our cooling plate is custimized, which is meeting to our customers' requirement to fit their applications.
Item | Stamped cooling plate |
Thickness of plate | 5~8mm or per your request |
Structure | Flow path channel plate & bottom cooling plate |
Accrssories package | Quick connector, water line fitting, water distributer, manifold, inlet, outlet etc. |
Design Service | YES. We have R&D department. |
Test Ability | |
Chemical Composition Test | YES |
Pysical Test & Optics Test | YES |
Roughness Test & Hardness Test | YES |
Elongation Test | YES |
Salt Spray Test | YES |
Burst Test | YES |
Nitrogen & Helium Test | YES |
Flow Resistance Test | YES. Inside &outside corrosion test |
Voltage Test | YES |
Under Water Test | YES. Check the leakage for welding |
We can provide more:
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond plate for heating / cooling.
Our Advantages:
Aid in cooling components design feasibility
Proven solutions for both prismatic and cylindrical cells
Capability in doing DVP with client
Fast support in prototype making
Thermal simulation
Brazing technology
Thermal Interface material
Key word of products: cooling ribbon, aluminium serpentine tube, extruded aluminum tube, water coolant plate, cylindrical cell cooling, cooling plate for Electric Vehicle, lithium battery cooling channel system, stamping cooling plate, aluminum heat exchanger, water cooled plate for EV battery, battery cooling design, BTM design
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team. Pls kindly send us your 3D drawing or boundry size of module.
Thickness of 6~8mm Aluminum Brazing Cooling Plate Heat Sink for Electric Vehicle
The brazing cooling plate is a mature design for prismatic cells or battery pack, through excellent stamping processing technology and high-quality aluminum raw materials, the performance of stamping type cooling plate to a higher standard. Our cooling plate is custimized, which is meeting to our customers' requirement to fit their applications.
Item | Stamped cooling plate |
Thickness of plate | 5~8mm or per your request |
Structure | Flow path channel plate & bottom cooling plate |
Accrssories package | Quick connector, water line fitting, water distributer, manifold, inlet, outlet etc. |
Design Service | YES. We have R&D department. |
Test Ability | |
Chemical Composition Test | YES |
Pysical Test & Optics Test | YES |
Roughness Test & Hardness Test | YES |
Elongation Test | YES |
Salt Spray Test | YES |
Burst Test | YES |
Nitrogen & Helium Test | YES |
Flow Resistance Test | YES. Inside &outside corrosion test |
Voltage Test | YES |
Under Water Test | YES. Check the leakage for welding |
We can provide more:
1) Stamping type cooling plate for prismatic cells / battery pack.
2) Extrusion snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Extruded tube with manifold for soft battery pack.
4) Roll bond plate for heating / cooling.
Our Advantages:
Aid in cooling components design feasibility
Proven solutions for both prismatic and cylindrical cells
Capability in doing DVP with client
Fast support in prototype making
Thermal simulation
Brazing technology
Thermal Interface material
Key word of products: cooling ribbon, aluminium serpentine tube, extruded aluminum tube, water coolant plate, cylindrical cell cooling, cooling plate for Electric Vehicle, lithium battery cooling channel system, stamping cooling plate, aluminum heat exchanger, water cooled plate for EV battery, battery cooling design, BTM design
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team. Pls kindly send us your 3D drawing or boundry size of module.
