Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
TR-T22144
Trumony
202201144
Aluminum Brazing Liquid Cooling Plate for Heat Exchanger of Automobile Cooling System Design Develop
The role of cooling plate is to keep maximum lithium-ion battery and optimum performance. We are aluminum manufacturer, it’s one of our biggest advantages to provide aluminum based cooling components for EV battery. We have strict quality control system with certificated TS 16949. As rich experienced and good communication, we have good reputation in clients.
Detials:
| Item | Water cooling plate for EV battery |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Applications |
|
Features:
*Design options:
1) Punching cooling plate
It used for prismatic cells and battery pack, bottom & side cooling solution;
2) Serpentine cooling ribbon
Applied for cylindrical cells: 18650, 21700, 3270, 4680 and etc;
3) Micro-channel tube with manifold
For battery pack side or bottom battery cooling;
4) Roll bonding cooling plate;
5) Friction stir welding plate
It has a simpler welding process, higher production efficiency, higher weld strength, and can avoid problems such as pores and liquid leakage in high-temperature fusion welding.
* Customized plate size and flow channel path
1) Design your liquid cooling plate according to battery pack boundary size;
2) Optimization flow path as the result of flow field simulation;
* One-stop service package
1) Design service: thermal simulation, flow field simulation, prototype making;
2) Online meeting technical support;
3) Sample fast dispatch.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Aluminum Brazing Liquid Cooling Plate for Heat Exchanger of Automobile Cooling System Design Develop
The role of cooling plate is to keep maximum lithium-ion battery and optimum performance. We are aluminum manufacturer, it’s one of our biggest advantages to provide aluminum based cooling components for EV battery. We have strict quality control system with certificated TS 16949. As rich experienced and good communication, we have good reputation in clients.
Detials:
| Item | Water cooling plate for EV battery |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Applications |
|
Features:
*Design options:
1) Punching cooling plate
It used for prismatic cells and battery pack, bottom & side cooling solution;
2) Serpentine cooling ribbon
Applied for cylindrical cells: 18650, 21700, 3270, 4680 and etc;
3) Micro-channel tube with manifold
For battery pack side or bottom battery cooling;
4) Roll bonding cooling plate;
5) Friction stir welding plate
It has a simpler welding process, higher production efficiency, higher weld strength, and can avoid problems such as pores and liquid leakage in high-temperature fusion welding.
* Customized plate size and flow channel path
1) Design your liquid cooling plate according to battery pack boundary size;
2) Optimization flow path as the result of flow field simulation;
* One-stop service package
1) Design service: thermal simulation, flow field simulation, prototype making;
2) Online meeting technical support;
3) Sample fast dispatch.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
