Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
TR-T22147
Trumony
202201147
LFP Blade Battery Side Cooling System Water Brazing Cold Plate for Electric Cars
A sound cooling system can not work well without a qualified cooling medium, and aluminum is chosen as the main material owing to its high thermal conductivity, usually it will be shaped into various end-products through different technologies, like stamping, casting, extruding and so on.
Detials:
| Item | EV battery liquid cold plate |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Test | Leakage test, pressure test, burst test and etc. |
| Applications |
|
Features:
*Design options:
1) Punching cooling plate
It used for prismatic cells and battery pack, bottom & side cooling solution;
2) Serpentine cooling ribbon
Applied for cylindrical cells: 18650, 21700, 3270, 4680 and etc;
3) Micro-channel tube with manifold
For battery pack side or bottom battery cooling;
4) Roll bonding cooling plate;
5) Friction stir welding plate
It has a simpler welding process, higher production efficiency, higher weld strength, and can avoid problems such as pores and liquid leakage in high-temperature fusion welding.
* Customized plate size and flow channel path
1) Design your liquid cooling plate according to battery pack boundary size;
2) Optimization flow path as the result of flow field simulation;
* One-stop service package
1) Design service: thermal simulation, flow field simulation, prototype making;
2) Online meeting technical support;
3) Sample fast dispatch.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
LFP Blade Battery Side Cooling System Water Brazing Cold Plate for Electric Cars
A sound cooling system can not work well without a qualified cooling medium, and aluminum is chosen as the main material owing to its high thermal conductivity, usually it will be shaped into various end-products through different technologies, like stamping, casting, extruding and so on.
Detials:
| Item | EV battery liquid cold plate |
| Thickness | Per your request / 5~8mm |
| Width/Length | It depends on your battery pack |
| Surface treatment | Zinc Spray, Insulation coated, Bare |
| Structure | Passenger channel plate, bottom cold plate, inlet/outlet |
| Process | Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying) a total of more than 20 procedures |
| Test | Leakage test, pressure test, burst test and etc. |
| Applications |
|
Features:
*Design options:
1) Punching cooling plate
It used for prismatic cells and battery pack, bottom & side cooling solution;
2) Serpentine cooling ribbon
Applied for cylindrical cells: 18650, 21700, 3270, 4680 and etc;
3) Micro-channel tube with manifold
For battery pack side or bottom battery cooling;
4) Roll bonding cooling plate;
5) Friction stir welding plate
It has a simpler welding process, higher production efficiency, higher weld strength, and can avoid problems such as pores and liquid leakage in high-temperature fusion welding.
* Customized plate size and flow channel path
1) Design your liquid cooling plate according to battery pack boundary size;
2) Optimization flow path as the result of flow field simulation;
* One-stop service package
1) Design service: thermal simulation, flow field simulation, prototype making;
2) Online meeting technical support;
3) Sample fast dispatch.
FAQ
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
