Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
Trumony
1.product introduction
Thermally Conductive Single Part Fillers has a single, two-component difference, the biggest difference between the two is that the single-component thermally conductive gel is similar to thermally conductive silicone grease, while the two-component thermally conductive gel is similar to thermally conductive silicone film, in general, the single-component thermally conductive gel will not be cured, and has been kept in a wet state, with a high rate of oil release. (Note: At present, there are also special-purpose, single-component can also be cured). Two-component thermally conductive gel will be cured, cured into an elastomer, there is a certain degree of adhesion, the oil rate is low. Both according to their own characteristics of different and to choose their appropriate applications.
2.application
3.Technological Parameters:
Thermal Single-compennet adhesive | ||
PROPERTY | TYPICAL VALUE | METHOD |
Color | Blue/customize | Visual |
Conductivity(W/m*K) | 6.4 | Hot Disk |
Density(g/cc) | 3.4 | Helium Pycnometer |
Capacity | 180cc | / |
Temperature Range | -40-150℃ | Trumonyteches method |
4.FAQ
A) How could I get a sample?
Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order.
B) Sample time?
Within 30 days.
C) Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
D) Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our MOQ.
E) How to guarantee the quality of your products?
1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
F) Do you accept R & D assignments?
Yes, as long as we can do products, we can according to Your Design Requirements of individual R & D.
1.product introduction
Thermally Conductive Single Part Fillers has a single, two-component difference, the biggest difference between the two is that the single-component thermally conductive gel is similar to thermally conductive silicone grease, while the two-component thermally conductive gel is similar to thermally conductive silicone film, in general, the single-component thermally conductive gel will not be cured, and has been kept in a wet state, with a high rate of oil release. (Note: At present, there are also special-purpose, single-component can also be cured). Two-component thermally conductive gel will be cured, cured into an elastomer, there is a certain degree of adhesion, the oil rate is low. Both according to their own characteristics of different and to choose their appropriate applications.
2.application
3.Technological Parameters:
Thermal Single-compennet adhesive | ||
PROPERTY | TYPICAL VALUE | METHOD |
Color | Blue/customize | Visual |
Conductivity(W/m*K) | 6.4 | Hot Disk |
Density(g/cc) | 3.4 | Helium Pycnometer |
Capacity | 180cc | / |
Temperature Range | -40-150℃ | Trumonyteches method |
4.FAQ
A) How could I get a sample?
Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order.
B) Sample time?
Within 30 days.
C) Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
D) Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our MOQ.
E) How to guarantee the quality of your products?
1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
F) Do you accept R & D assignments?
Yes, as long as we can do products, we can according to Your Design Requirements of individual R & D.
