Phone:
+86-13584862808
 |
| Quantity: | |
|---|---|
TR-T22075
Trumony
TR-T22075
Clad strip/Fin/Thick strip/plates
I. D.: 150 200 250 300 400 500mm
O. D.：2000mm
Coil: thick 0.04~4.0mm, width 8~1500mm
Sheet: thick 0.4~4.0mm，width 450~1500mm
Clad ratio: 4% up to 30%
Nos. of clad layer: Single layer, double layers, multi-layers
Tolerance of clad ratio:
Cladding thickness of 4~6%:±1.5%
Cladding thickness of 6~12%:±2%
Cladding thickness of 12~16%:±2.5%
Cladding thickness of 16~20%:±3%
Cladding thickness of 20~30%:±4%
Processing: Forming Slitting Stamping Slitting
Core material:
| Alloy No. | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.1 | - | - |
| 3003+1%Zn | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.5-1.5 | - | - |
| 3003+1.5%Zn | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 1.0-2.0 | - | - |
| 3003+1.5%Zn+Zr | 0.65~1.0 | 0.4 | 0.05 | 1.4-1.8 | 0.03 | 1.3-1.7 | 0.05-0.2 | - |
| 3003+0.5%Cu | 0.6 | 0.7 | 0.3-0.7 | 1.0-1.5 | - | 0.1 | - | - |
| 3005 | 0.6 | 0.7 | 0.2-0.4 | 1.0-1.5 | - | 0.25 | - | - |
Clad Alloy
| Alloy Grade | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti |
| 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | - | 0.2 | - | - |
| 4343+1%Zn | 6.8-8.2 | 0.8 | 0.25 | 0.1 | - | 0.5-1.5 | - | - |
| 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | - | 0.2 |
| 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.5-1.5 | - | 0.2 |
| 4004 | 9.0-11.0 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | - | - |
| 7072 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | - | - | ||
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.5-1.0 | - | - |
Applications of aluminum coil:
1) Condensers
2) Evaporators
3) Oil coolers
4) Heater cores
5) Refrigerator
6) Air conditioner
5)Electrical Vehicle battery cooling
Clad strip/Fin/Thick strip/plates
I. D.: 150 200 250 300 400 500mm
O. D.：2000mm
Coil: thick 0.04~4.0mm, width 8~1500mm
Sheet: thick 0.4~4.0mm，width 450~1500mm
Clad ratio: 4% up to 30%
Nos. of clad layer: Single layer, double layers, multi-layers
Tolerance of clad ratio:
Cladding thickness of 4~6%:±1.5%
Cladding thickness of 6~12%:±2%
Cladding thickness of 12~16%:±2.5%
Cladding thickness of 16~20%:±3%
Cladding thickness of 20~30%:±4%
Processing: Forming Slitting Stamping Slitting
Core material:
| Alloy No. | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.1 | - | - |
| 3003+1%Zn | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.5-1.5 | - | - |
| 3003+1.5%Zn | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 1.0-2.0 | - | - |
| 3003+1.5%Zn+Zr | 0.65~1.0 | 0.4 | 0.05 | 1.4-1.8 | 0.03 | 1.3-1.7 | 0.05-0.2 | - |
| 3003+0.5%Cu | 0.6 | 0.7 | 0.3-0.7 | 1.0-1.5 | - | 0.1 | - | - |
| 3005 | 0.6 | 0.7 | 0.2-0.4 | 1.0-1.5 | - | 0.25 | - | - |
Clad Alloy
| Alloy Grade | Si | Fe | Cu | Mn | Mg | Zn | Zr | Ti |
| 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | - | 0.2 | - | - |
| 4343+1%Zn | 6.8-8.2 | 0.8 | 0.25 | 0.1 | - | 0.5-1.5 | - | - |
| 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | - | 0.2 |
| 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.5-1.5 | - | 0.2 |
| 4004 | 9.0-11.0 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | - | - |
| 7072 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | - | - | ||
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.5-1.0 | - | - |
Applications of aluminum coil:
1) Condensers
2) Evaporators
3) Oil coolers
4) Heater cores
5) Refrigerator
6) Air conditioner
5)Electrical Vehicle battery cooling
