CTP (cell to pack, no module power battery pack)CTP technology refers to skipping the standard module link, integrating the battery cell on the battery pack, and then installing it on the vehicle body. Its essence is to increase energy density and reduce costs. Its integrated technology was first pr

CTM (Cell To Module)CTM refers to the module composed of batteries, and then the battery pack is formed by the modules. In short, the packaging form is "cell-battery module-battery pack". After completion, the battery pack is integrated into the chassis of the car. structural technology.This structu

Liquid cooling refers to reducing the temperature of the battery by taking away the heat generated by the battery in operation through the cooling pipe inside the battery pack and the cooling liquid of the cooling plate. Its advantages are high heat transfer coefficient, large thermal energy, fast c

Since most of the power sources of new energy vehicles are lithium iron phosphate or ternary batteries, while the power battery provides power for new energy vehicles, the battery itself emits a lot of heat, which will increase the temperature of the power battery.

In the case of the liquid cooling plates and serpentine bends we have at Trumonytechs, for example, in indirect contact liquid cooling, the fluid flows inside the pipe and comes into direct contact with the battery through the thermal conductivity interface material, for example, transferring heat through the thermal conductivity interface material and cooling the battery by transporting it through the fluid flow heat exchanger.

The goal of power battery thermal management is not only to ensure that the battery module works within the appropriate temperature range, but also to ensure that the internal temperature of the module is uniform as far as possible. The liquid cooling plate is an important part of the active liquid

Usually a set of liquid cooling plate is provided at the bottom of the module in the battery system, and the liquid cooling plate is connected to the circulating pump, heat exchanger and overwater heater to form a circulating heating and cooling system by connecting the pipeline.

Liquid cooling is to reduce the temperature of the battery by taking away the heat generated in the battery work through the cooling pipeline and coolant inside the battery pack. The advantage is its high heat transfer coefficient, high thermal energy, fast cooling efficiency and remarkable battery

The water-cooled plate, a component for heat transfer through liquid cooling. The principle is to process the flow channel in the metal plate. After the electronic components are installed on the surface of the plate (the middle is coated with heat-conductive medium), the coolant enters from the inl

Looking back on 2021, it is a year of challenges and opportunities for the automotive industry. Auto industry faces a lot of influence such as the shortage of chip supply, the outbreak of scattered epidemic, the adjustment of policies and regulations and so on.